schottky barrier diode RB050L-60 z applications z dimensions (unit : mm) z land size figure (unit : mm) general rectification z features 1)small power mold type. (pmds) 2)low i r 3)high reliability z structure z construction silicon epitaxial planar z taping specifications (unit : mm) z absolute maximum ratings (ta=25c) symbol unit v rm v v r v io a io a i fsm a tj c tstg c (*2) on the glass epoxy substrate, half sine wave at 180 z electrical characteristics (ta=25c) symbol min. typ. max. unit conditions v f 1 - - 0.52 v i f =2.0a v f 2 - - 0.56 v i f =3.0a reverse current i r - - 100 a v r =60v parameter forward voltage parameter limits reverse voltage (repetitive) 60 (*1) on the glass epoxy substrate, half sine wave at 180tc=69c max storage temperature -40to+150 forward current surge peak (60hz ? 1cyc) reverse voltage (dc) 60 70 junction temperature 150 average rectified forward current (*1) 3 average rectified forward current (*2) 2 rohm : pmds jedec : sod-106 3 4 0.10.02 0.1 2.60.2 2.00.2 5.00.3 1.20.3 4.50.2 1.50.2 c manufacture date 2 pmds 2.0 4.2 2.0 4.00.1 2.90.1 4.00.1 2.00.05 1.550.05 5.50.05 1.750.1 120.2 1.55 9.50.1 0.3 5.30.1 0.05 2.8max 1/3 2009.06- rev.a www.rohm.com ?2009 rohm co., ltd. all rights reserved.
RB050L-60 0 1 2 3 4 5 012345 0.1 1 10 100 1000 0.001 0.1 10 1000 rth(j-a) rth(j-c) mounted on epoxy board 1ms im=100ma i f =100ma 300us time 1 10 100 1000 110100 t ifsm 0 50 100 150 200 250 300 1 10 100 8.3ms ifsm 1cyc 8.3ms 0 10 20 30 40 50 60 70 80 90 100 ave25.93a ta=2 5 c v r =60v n=50pcs 1 10 100 1000 0 5 10 15 20 25 30 0.001 0.01 0.1 1 10 100 1000 10000 0 102030405060 ta=125 c ta=25 c ta=-25 c ta=75 c 0.01 0.1 1 10 0 0.10.20.30.40.50.6 ta=-25 c ta=125 c ta=7 5 c ta=25 c forward voltage v f (v) v f -i f characteristics forward current:i f (a) reverse current:i r (ua) reverse voltage v r (v) v r -i r characteristics capacitance between terminals:ct(pf) reverse voltage:v r (v) v r -ct characteristics v f dispersion map forward voltage:v f (mv) reverse current:i r (ua) i r dispersion map capacitance between terminals:ct(pf) ct dispersion map i fsm disresion map peak surge forward current:i fsm (a) peak surge forward current:i fsm (a) number of cycles i fsm -cycle characteristics peak surge forward current:i fsm (a) ti me: t (m s ) i fsm -t characteristics ti me: t (s ) rth-t characteristics transient thaermal impedance:rth ( /w) forward power dissipation:pf(w) average rectified forward current io(a) io-pf characteristics trr dispersion map reserve recovery time:trr(ns) f=1mhz 0.46 0.47 0.48 0.49 0.5 0.51 0.52 ave:0.4884v ta=25 c i f =3a n=50pcs 550 560 570 580 590 600 610 620 630 640 650 ave:597.5pf ta=25 c f=1mhz v r =0v n=20pcs 0 50 100 150 200 250 300 ave:207.4a 8.3ms ifsm 1cyc 0 10 20 30 40 50 ave25.6ns ta=2 5 c i f =0.1a i r =0.1a irr=0 .1i r n=20pcs dc d=1/2 sin( 180) 2/3 2009.06 - rev.a data sheet www.rohm.com ?2009 rohm co., ltd. all rights reserved.
RB050L-60 0 0.1 0.2 0.3 0.4 0.5 0.6 0 102030405060 0 1 2 3 4 5 6 7 0 25 50 75 100 125 150 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 0 25 50 75 100 125 150 reverse power dissipation:p r (w) reverse voltage:v r (v) v r -p r characteristics ambient temperature:ta( c) derating curv e'(io-ta) average rectified forward current:io(a) average rectified forward current:io(a) case temparature:tc( c) derating curv e'(io-tc) electrostatic discharge test esd(kv) esd dispersion map sin( 180) dc d=1/2 d=1/2 dc sin( 180) t tj=150 c d=t/t t v r io v r =30v 0a 0v sin( 180) dc d=1/2 ttj=150 c d=t/t t v r io v r =30v 0a 0v 0 5 10 15 20 25 30 c=200pf r=0 ? c=100pf r=1.5k ? no break at 30kv ave:13.02kv 3/3 2009.06 - rev.a data sheet www.rohm.com ?2009 rohm co., ltd. all rights reserved.
r0039 a www.rohm.com ? 2009 rohm co., ltd. all rights reserved. notice rohm customer support system http://www.rohm.com/contact/ thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. notes no copying or reproduction of this document, in part or in whole, is permitted without the consent of rohm co.,ltd. the content specied herein is subject to change for improvement without notice. the content specied herein is for the purpose of introducing rohm's products (hereinafter "products"). if you wish to use any such product, please be sure to refer to the specications, which can be obtained from rohm upon request. examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the products. the peripheral conditions must be taken into account when designing circuits for mass production. great care was taken in ensuring the accuracy of the information specied in this document. however, should you incur any damage arising from any inaccuracy or misprint of such information, rohm shall bear no responsibility for such damage. the technical information specied herein is intended only to show the typical functions of and examples of application circuits for the products. rohm does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by rohm and other parties. rohm shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. the products specied in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, ofce-automation equipment, commu- nication devices, electronic appliances and amusement devices). the products specied in this document are not designed to be radiation tolerant. while rohm always makes efforts to enhance the quality and reliability of its products, a product may fail or malfunction for a variety of reasons. please be sure to implement in your equipment using the products safety measures to guard against the possibility of physical injury, re or any other damage caused in the event of the failure of any product, such as derating, redundancy, re control and fail-safe designs. rohm shall bear no responsibility whatsoever for your use of any product outside of the prescribed scope or not in accordance with the instruction manual. the products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). rohm shall bear no responsibility in any way for use of any of the products for the above special purposes. if a product is intended to be used for any such special purpose, please contact a rohm sales representative before purchasing. if you intend to export or ship overseas any product or technology specied herein that may be controlled under the foreign exchange and the foreign trade law, you will be required to obtain a license or permit under the law.
|
